How to copy both sides of a driver’s license onto one page
- Photograph the front on a dark surface, phone held flat above it, flash off.
- Drag the four dots onto the license corners; the tool straightens it to 3.370 × 2.125 in.
- Photograph the back, the side with the barcode, and mark its corners the same way.
- Pick US Letter or A4, colour or greyscale, one copy or a full sheet.
- Print at “Actual size” so the copy matches the real card, or download the JPG for an upload form.
Who asks for a copy of both sides
- Landlords and property managers with a rental application
- Employers during onboarding
- Car rental, car dealers and insurers
- Notaries, banks and pharmacies keeping a record of the ID they checked
- Travel and event bookings that need proof of age or identity
The back matters because it carries the PDF417 barcode that many systems scan, plus endorsements and restrictions.
License size
| US and Canada | 3.370 × 2.125 in (85.6 × 54 mm), per the AAMVA card design standard, which follows ISO/IEC 7810 ID-1 |
|---|---|
| UK, EU and most other countries | Photocard licences: the same ID-1 size |
| Vertical licenses | Some states issue under-21 licenses in portrait format. Mark the corners as usual: the tool detects portrait cards and keeps them upright. |
Tips for a sharp, readable copy
- Holograms and laminate reflect light. Photograph near a window, not under a ceiling lamp, and tilt the card if a hotspot covers text.
- Get close: the card should fill most of the frame so fine print stays readable.
- Use Greyscale if you are faxing or the copy only needs to be legible.
Frequently asked questions
What size is a driver’s license?
US and Canadian licenses follow the AAMVA card design standard, which uses the ID-1 size: 3.370 × 2.125 in (85.6 × 54 mm). UK and EU photocard licences use the same size.
How do I print it at the right size?
Open the PDF and print with “Actual size” or “100%” scaling. “Fit to page” shrinks it.
The hologram makes glare on my photo. What can I do?
Tilt the card slightly away from the light, or switch off the flash and photograph near a window. Glare on a hologram is normal; make sure the text and photo are readable.
Can I add a second card, like a state ID?
Make one page per card. If you need several copies of the same license, choose “Fill the page” under Copies.
Should I hide part of my license number?
Only if the person asking allows it. Some places accept a partly covered copy; others need it in full. Ask before you send it.
Last updated 2026-10-18.